Author Topic: Favorite Toy Stove  (Read 3463 times)

Offline Jerry Cermack

  • Regular member
  • *
  • Posts: 6016
  • Karma: +0/-0
  • Collector
Favorite Toy Stove
« on: September 26, 2005, 09:11:14 PM »
Jerry

Offline Harry Riva

  • Regular member
  • *
  • Posts: 4355
  • Karma: +0/-0
  • Retired and trying to keep Molly happy
Re: Favorite Toy Stove
« Reply #1 on: September 26, 2005, 09:18:22 PM »
Jerry, I don't think this is the real McCoy. You can ask if the inside of the removable pieces are marked. The Dolly had DF on the parts.
Harry

Offline Will Person

  • Regular member
  • *
  • Posts: 10056
  • Karma: +1/-0
  • Back from the big house
Re: Favorite Toy Stove
« Reply #2 on: September 27, 2005, 12:13:07 AM »
I am with Harry,  it don't look "crisp" enought to me.   Look at the lower right picture.   Look at the rounded edge of the stove.   Very rough casting.  Very bad.   Compare it to the blue book.   Not real in my book.

Will Person Jr. 8-)

Offline Greg Stahl

  • Administrator
  • Regular member
  • *****
  • Posts: 14501
  • Karma: +3/-0
  • Ole Scratch
Re: Favorite Toy Stove
« Reply #3 on: September 27, 2005, 01:08:54 AM »
not a dolly's as it would be marked as such.  As Harry said, it should have DF on all the parts too.
"NO MORE MISTER NICE GUY!!" Alice Cooper.

Offline C. Perry Rapier

  • Regular member
  • *
  • Posts: 26158
  • Karma: +0/-0
Re: Favorite Toy Stove
« Reply #4 on: September 27, 2005, 07:25:25 AM »
I got one of them stupid look good at 60 feet away reproductions. I'm gonna give you all a dead give away way of telling a repro from the real deal that is so good I guarantee that a blind man can tell and thats no exageration. If you see the repro you can spot it very quickly anyway but, on a real Dolly the stove pipe is made out of a tin stove material and it is made that way because it is truly a functional stove. The stove pipe would weigh not even a pound because its just made of tin. Well, in reproducing this the Chinese have taken this stove pipe made of tin, and copied it in cast iron, so the stove pipe to the repros are made out of cast iron and weigh probably 10 lbs or darn close to it. Thats why I said a blind man can tell the difference. Also, the repros just have cotter key looking things that hold the doors on with the hinges, and when you open the doors up they just sag instead of staying in line to be closed. I know my Dolly Stoves. I have seen about 8 real ones up close and looked them over very close and in my opinion they are a cast iron work of art. I have seen them in black, grey, blue, and turq colors with nickel trim.

moosejaw

  • Guest
Re: Favorite Toy Stove
« Reply #5 on: September 27, 2005, 04:12:38 PM »
[size=14]How much do authentic Dolly Stoves sell for?  The one Jerry listed may be a repro, but it would be neat for a little kid as a play stove.  Shipping might be a pip, but it doesn't look like this will sell for much.[/size]


Offline C. Perry Rapier

  • Regular member
  • *
  • Posts: 26158
  • Karma: +0/-0
Re: Favorite Toy Stove
« Reply #6 on: September 27, 2005, 06:08:34 PM »
I've never seen a good one for under 4500.00. I've seen ones with missing parts that looked rough for 1500.00 also, but you don't see these everyday and every one I've seen has been at anitique shops as Troy Hockensmith says have "already been found".

Steve_Stephens

  • Guest
Re: Favorite Toy Stove
« Reply #7 on: October 11, 2005, 03:02:34 AM »
Jerry, the description of that stove says it is a copy.  The real ones have a lot of differences including the two little doors on the left front of the stove are different sizes and design on the orignals with a small ash shelf between them.  Also, the originals are highly marked on the left end of the stove.

Steve