Author Topic: Hosting a Cleaning and Seaoning Workshop  (Read 1686 times)

Offline Roger Barfield

  • Administrator
  • Regular member
  • *****
  • Posts: 8597
  • Karma: +3/-0
Re: Hosting a Cleaning and Seaoning Workshop
« Reply #20 on: October 08, 2010, 04:50:23 PM »
Here's a skillet JR Doffin brought as an example of the power of electrolysis.  
« Last Edit: October 08, 2010, 06:08:59 PM by Fryerman »
As iron sharpens iron, so one person sharpens another.

Offline Chuck Rogers

  • Regular member
  • *
  • Posts: 8671
  • Karma: +0/-0
Re: Hosting a Cleaning and Seaoning Workshop
« Reply #21 on: October 08, 2010, 05:01:00 PM »
Thank you Bryce. Believe me, I was panicing on the inside. I really enjoyed all the question, and I actually learned a thing or 2. Deb was a big help. She was very supportive, and also helped me get set up, and then even packed most everything, and hauled it back to the room on the cart. I was busy talking to a bunch of folks about the workshop.

I have no idea why I put Olive Oil in the hand outs, and also said that during the workshop. I plan on letting folks know at dinner.

Note to self: Use [size=22]GRAPE SEED[/size] oil.
"As long as a hundred of us remain alive we will never be subject to tyrannical dominion because it is not for glory or riches or honours that we fight, but for freedom alone which no worthy man loses

Offline Chuck Rogers

  • Regular member
  • *
  • Posts: 8671
  • Karma: +0/-0
Re: Hosting a Cleaning and Seaoning Workshop
« Reply #22 on: October 08, 2010, 05:02:52 PM »
Quote
Here's a skillet JR Doffin brought as an example of the power of electrolysis.  

That was a great example. I'm glad he brought it. I had no dirty iron for the before, but plenty of clean stuff.
"As long as a hundred of us remain alive we will never be subject to tyrannical dominion because it is not for glory or riches or honours that we fight, but for freedom alone which no worthy man loses

Offline Roger Barfield

  • Administrator
  • Regular member
  • *****
  • Posts: 8597
  • Karma: +3/-0
Re: Hosting a Cleaning and Seaoning Workshop
« Reply #23 on: October 08, 2010, 05:07:47 PM »
Chuck did a great job.  Tough to be put on the spot with a demonstration at your first convention, but he came through with flying colors.   [smiley=clap.gif] [smiley=appl.gif]  
As iron sharpens iron, so one person sharpens another.

rusty_bottom

  • Guest
Re: Hosting a Cleaning and Seaoning Workshop
« Reply #24 on: June 03, 2011, 07:48:20 PM »
Hi! :)People in the automotive/machineshop think highly of sonice cleaners,they even remove paint.Have these worked well on this industries iron.Secondly,is replating my old and worthy pieces a good idea,or,not.thanks

Offline Chuck Rogers

  • Regular member
  • *
  • Posts: 8671
  • Karma: +0/-0
Re: Hosting a Cleaning and Seaoning Workshop
« Reply #25 on: June 03, 2011, 11:01:25 PM »
Haven't heard anything about sonic cleaning for CI. It may be something to look into. If you have access to a system, give it a try with a not so good piece, just to be safe. I can't see it hurting the iron, but better safe, than sorry.

Replating pieces is an option, but can get a bit pricey. Unless of course you have access to a plating operation.
"As long as a hundred of us remain alive we will never be subject to tyrannical dominion because it is not for glory or riches or honours that we fight, but for freedom alone which no worthy man loses