Page Index Toggle Pages: [1] 2  Print
Very Hot Topic (More than 25 Replies) My Wife called me... (Read 6023 times)
Doug R. Hoffman
Forum Visitor
*
Offline


WAGS: The heartbeat of
cast iron collecting.

Posts: 63
Location: Roseburg, OR
Joined: Aug 4th, 2017
Gender: Male
My Wife called me...
Sep 3rd, 2017 at 10:18pm
Print Post  
while she was on her daily walk around the country lane, said some new people had moved into a house on the lane, that there was a big cast iron POT at the driveway with a "FREE to GOOD HOME sign on it. Since she knows my desire to collect CI at a good price, decided she would let me know. 5 Minutes later ( after confirming with the owner ) I tossed the following (pics ) into the back of the PU. Big crack,  but it is obviously an old kettle that deserves some TLC, so will brush and clean it, probably just paint it, will put some bolted cross supports on the crack, but open to all suggestions and sme idea of its background???
  

Curry_Rd_Kettle3.jpg ( 258 KB | 1 Download )
Curry_Rd_Kettle3.jpg
Curry_Rd_Kettle2.jpg ( 249 KB | 0 Downloads )
Curry_Rd_Kettle2.jpg
Curry_Rd_Kettle4.jpg ( 238 KB | 0 Downloads )
Curry_Rd_Kettle4.jpg
Curry_Rd_Kettle5.jpg ( 185 KB | 1 Download )
Curry_Rd_Kettle5.jpg
Back to top
 
IP Logged
 
C. Perry Rapier
WAGS member
*****
Offline



Posts: 26151
Location: Greenville
Joined: Dec 26th, 2002
Gender: Male
Re: My Wife called me...
Reply #1 - Sep 4th, 2017 at 5:28pm
Print Post  
I don't mean to be mean, but I'd take it back. If the owner wanted to do all of  that stuff to try to put that piece back on its feet I'd let them, but I sure would not do it, its not worth it. IMO of course
  
Back to top
 
IP Logged
 
Keith Rumgay
WAGS member
*****
Offline


WAGS: Heartbeat of Cast
Iron Cookware Collecting

Posts: 436
Location: Milwaukie ,Oregon
Joined: Jul 27th, 2011
Re: My Wife called me...
Reply #2 - Sep 4th, 2017 at 5:50pm
Print Post  
Doug
I would drill a 3/8 to 1/2 inch hole at the end of the crack and a bolt a 1/2" wide by 3" long plate just under the eye where it starts then 3 or 4 more holes in the bottom  for drains and plant flowers in it No Clean up or Paint Just good old Pacific North West Patina
Keith
  
Back to top
 
IP Logged
 
Spurgeon Hendrick
WAGS member
*****
Offline


WAGS: The heartbeat of
cast iron collecting.

Posts: 841
Location: Marietta, GA
Joined: Feb 26th, 2017
Gender: Male
Re: My Wife called me...
Reply #3 - Sep 4th, 2017 at 9:01pm
Print Post  
I normally cringe when I see cast iron used as a flower pot, but that might be the only fate left for this one. And I say "might" because I would explore every option before resigning it to the flower bed.

First, I would clean it up as best as I could. Who knows, after you clean it up, you might find another use for it. Maybe bring it indoors, put a table top on it and make a card table out of it. Or a TV stand. Or make it into a cool storage bin for all the junk in the mud room. Endless possibilities!

Kudos on a great find.
  
Back to top
 
IP Logged
 
Doug R. Hoffman
Forum Visitor
*
Offline


WAGS: The heartbeat of
cast iron collecting.

Posts: 63
Location: Roseburg, OR
Joined: Aug 4th, 2017
Gender: Male
Re: My Wife called me...
Reply #4 - Sep 4th, 2017 at 10:39pm
Print Post  
Well, being as I am RETIRED, and IT WAS FREE, a little elbow grease for clean-up, and some minor repairs to arrest that crack ( thanks keith for the end of the crack drill hole - forgot that little piece of engineering knowledge ). I don't for-see anything more than planter/yard art, BUT Come-On , PERRY, I'll get $35+ for it at my annual garage sale next summer, plus I get to admire it for a year... see how easy I am to keep occupied!
Two gate marks on the bottom, and the number???  odd size ring ends on the eyes, anybody with foundry/age details just to satisfy my curiosity???
  
Back to top
 
IP Logged
 
Doug R. Hoffman
Forum Visitor
*
Offline


WAGS: The heartbeat of
cast iron collecting.

Posts: 63
Location: Roseburg, OR
Joined: Aug 4th, 2017
Gender: Male
Re: My Wife called me...
Reply #5 - Sep 4th, 2017 at 10:51pm
Print Post  
Thks for the great ideas Spurgeon, really started me thinking... coat tree base, swivel TV stand is real possibility, or how about a base for a Cast Iron pot and pan hanging tree???
  
Back to top
 
IP Logged
 
Dwayne Henson
Forum Administrator
WAGS member
*****
Offline


When the people fear their
government, there is

Posts: 6174
Location: Amarillo, TX
Joined: Apr 28th, 2005
Gender: Male
Re: My Wife called me...
Reply #6 - Sep 5th, 2017 at 6:58pm
Print Post  
Do you know a good welder that owes you a favor?
  
Back to top
 
IP Logged
 
C. Perry Rapier
WAGS member
*****
Offline



Posts: 26151
Location: Greenville
Joined: Dec 26th, 2002
Gender: Male
Re: My Wife called me...
Reply #7 - Sep 5th, 2017 at 7:55pm
Print Post  
Dwayne Henson wrote on Sep 5th, 2017 at 6:58pm:
Do you know a good welder that owes you a favor?


As many years as I have been involved in cast iron cookware I have always HEARD about cast iron cookware welders BUT, I have never seen a welded piece nor have I EVER met a cast iron cookware welder. They are like elves. Everybody talks about them, everybody knows there are there, but you just never see them. OR you hear about a man that knew a man that knew a man that knew a cast iron welder's brother. But that's as close as I ever got.
  
Back to top
 
IP Logged
 
Dwayne Henson
Forum Administrator
WAGS member
*****
Offline


When the people fear their
government, there is

Posts: 6174
Location: Amarillo, TX
Joined: Apr 28th, 2005
Gender: Male
Re: My Wife called me...
Reply #8 - Sep 5th, 2017 at 10:29pm
Print Post  
I have a guy down the street that can weld cast iron. He put a handle back on a Sidney 11.
  
Back to top
 
IP Logged
 
Doug R. Hoffman
Forum Visitor
*
Offline


WAGS: The heartbeat of
cast iron collecting.

Posts: 63
Location: Roseburg, OR
Joined: Aug 4th, 2017
Gender: Male
Re: My Wife called me...
Reply #9 - Sep 5th, 2017 at 10:42pm
Print Post  
Just reading on how to weld CI brought $ signs floating across my eyes.. have several friends who were professional welders and I dont even want to ask them... just going to band it and give my creative inspiration time to work... say, 10-15 yrs.. Halloween coming up, some dry ice and a witch stirring the pot on the front walk...Hmmmm.
  
Back to top
 
IP Logged
 
Susan Salsburg
WAGS member
*****
Offline


WAGS: Heartbeat of Cast
Iron Cookware Collecting

Posts: 568
Location: South Jersey
Joined: Aug 31st, 2011
Re: My Wife called me...
Reply #10 - Sep 11th, 2017 at 10:51am
Print Post  
Don't know why this is always such a mystery! No one ever believes me. Find a good car restoration or racing shop. They weld very expensive engine blocks all the time. The block in my 1961 Jaguar had a chunk broken out, fixed for $75 & I'm still racing it. Actually "weld" isn't the right word, "brazing" would be more correct. My race shop put a handle back on a Erie skillet & only a fine line of the brazing shows. Also the hinge on a waffle iron. I touch it up with high-temp paint about once a year, because I cook with it & my hand wears off the paint. For display, a fine line of paint over the braze would last fine. I'd have that pot looking pretty on my front porch in a heartbeat!
  
Back to top
 
IP Logged
 
C. Perry Rapier
WAGS member
*****
Offline



Posts: 26151
Location: Greenville
Joined: Dec 26th, 2002
Gender: Male
Re: My Wife called me...
Reply #11 - Sep 11th, 2017 at 7:10pm
Print Post  
Hello Susan. You are very fortunate to have access to a welder who can do all the wonderful things you describe in welding. A person who can do all this is rare indeed. Good for you. ME, I have never seen a person who can do all of that. I guess they just know how to weld where you are from.
  
Back to top
 
IP Logged
 
Valerie Johnson
Forum Visitor
*
Offline


WAGS: Heartbeat of Cast
Iron Cookware Collecting

Posts: 668
Joined: Jun 30th, 2013
Gender: Female
Re: My Wife called me...
Reply #12 - Sep 11th, 2017 at 9:14pm
Print Post  
C. Perry Rapier wrote on Sep 11th, 2017 at 7:10pm:
I guess they just know how to weld where you are from.


Now Perry...We know how to do a lot of things up here in South Jersey...now that doesn't sound quite right...up here in south Jersey...oh well you get the idea. Tongue
  
Back to top
 
IP Logged
 
Susan Salsburg
WAGS member
*****
Offline


WAGS: Heartbeat of Cast
Iron Cookware Collecting

Posts: 568
Location: South Jersey
Joined: Aug 31st, 2011
Re: My Wife called me...
Reply #13 - Sep 11th, 2017 at 9:17pm
Print Post  
Check with the local speed shop. Not as esoteric as you all assume.
  
Back to top
 
IP Logged
 
Doug R. Hoffman
Forum Visitor
*
Offline


WAGS: The heartbeat of
cast iron collecting.

Posts: 63
Location: Roseburg, OR
Joined: Aug 4th, 2017
Gender: Male
Re: My Wife called me...
Reply #14 - Sep 11th, 2017 at 11:14pm
Print Post  
Susan

Your info on having a " Speed Shop" weld it sounds absolutely rock solid, and I will look into it. The fact the you still race a 61 Jaguar however gives away the " method of your madness"!

  
Back to top
 
IP Logged
 
C. Perry Rapier
WAGS member
*****
Offline



Posts: 26151
Location: Greenville
Joined: Dec 26th, 2002
Gender: Male
Re: My Wife called me...
Reply #15 - Sep 12th, 2017 at 10:34am
Print Post  
Susan Salsburg wrote on Sep 11th, 2017 at 9:17pm:
Check with the local speed shop. Not as esoteric as you all assume.


OH yea, SURE, 'the local speed shop' Grin
  
Back to top
 
IP Logged
 
Jerry Cermack
Global Moderator
WAGS member
*****
Offline


Collector

Posts: 5993
Location: Tupelo, MS.
Joined: Dec 11th, 2002
Gender: Male
Re: My Wife called me...
Reply #16 - Sep 12th, 2017 at 10:52am
Print Post  
In my other life when I worked, I had Maintenance men who welded a variety of broken or cracked Cast iron parts on various machinery that worked very well.

www.lincolnelectric.com/en-us/support/welding-how-to/Pages/cracks-cast-iron-deta...

http://www.lincolnelectric.com/en-us/support/welding-how-to/Pages/cracks-cast-ir...
  
Back to top
 
IP Logged
 
Susan Salsburg
WAGS member
*****
Offline


WAGS: Heartbeat of Cast
Iron Cookware Collecting

Posts: 568
Location: South Jersey
Joined: Aug 31st, 2011
Re: My Wife called me...
Reply #17 - Sep 12th, 2017 at 11:35am
Print Post  
What's the deal Perry? You live in a town with no fast cars? You're not that far from Eldora Speedway and Lockwood up in Celina has a good rep. I can just see you in a pretty little dirt car with Wags logos.
  
Back to top
 
IP Logged
 
C. Perry Rapier
WAGS member
*****
Offline



Posts: 26151
Location: Greenville
Joined: Dec 26th, 2002
Gender: Male
Re: My Wife called me...
Reply #18 - Sep 12th, 2017 at 11:44am
Print Post  
Funny thing about Eldora Susan. I knew the man that owed Eldora. But I never went there to a race. Now that man has died and Tony Stewart owns the place. I guess I'm just not a 'motor head'. I'm sure we have people around here who can weld cast iron and such, but I surely don't know of any such person.
  
Back to top
 
IP Logged
 
Terry Wharton
WAGS member
*****
Offline


Toledo #6 OBI Punch Press

Posts: 427
Joined: Dec 13th, 2010
Re: My Wife called me...
Reply #19 - Sep 12th, 2017 at 12:29pm
Print Post  
Here's a gas weld on a goose-necked bottom-gated that I gave $5.00 for at a blazing hot country auction on a hillside (with all the CI laid out on two hay wagons). Back in the day, Dad, his brother, and a family friend all ran inline Chevy's with split manifolds, so somebody was blocking them off.
  

gas-welded_resized.jpg ( 166 KB | 0 Downloads )
gas-welded_resized.jpg
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Print